MICROSTEAM
With a treatment capacity of 260 gallons per day, the MICROSTEAM decontamination system has been designed to secure and facilitate your laboratory operations.
Its operation is very similar to that of the MICRO model except that it uses tangential steam injection which allows to heat the system uniformly and more quickly and thus to carry out more cycles.
This compact unit meets the most stringent decontamination standards, allowing highly secure decontamination and containment of your biowaste effluent.
- Product features
- Product in action
- Ask a quote
Features
- Effluent BSL: 1-2-3
- Capacity: Up to 260 gallons per day
- Technology: Batch
- Utility: Steam
Decontamination
- Heat treatment with F050 depending on the required safety levels
- Standard set 135°F – 2 minutes
- 185-gallon effluent storage tank
- Automatic start of treatment cycles according to the level of effluent
- Guaranteed effluent decontamination with tangential steam injection which creates agitation within the kill tank, thus allowing faster and uniform heating
- Validation of the treatment temperature and efficiency by sensors and temperature control in several points including the coldest point
- Ensured containment of contaminated effluent with enhanced safety devices
- Continuous operation thanks to the collecting tank located before the kill tank so as not to have to stop the use of the unit during the treatment cycle
Design
- Patented steam plug-and-play unit: 110 V – 60 Hz – 1 kW – 9.5 A (excluding steam generator)
- Steam: 65 psig – 4.5 barg – 24 kW – 30 kg/h
- Compact footprint: W: 52” – L: 76” – H: 87” including vent filter
- Fully automatic operation: monitoring desk for monitoring and automatic recording of cycles by the PLC
- Energy recovery section to cool effluent at the outlet without additional refrigerant and save energy, cost and time (for instance electricity consumption reduced by 75%)
- Cooling located after the decontamination tank which saves energy since there is no need to heat and then cool the decontamination tank
- CIP skid for the decontamination tank
- Fully automatic operation: monitoring desk and automatic recording of cycles by PLC (self diagnosis programs included)
- Gravity drainage
- Sealed unit: the buffer tank and treatment section is inside the system
- Leak detection system: alarms and optional visual control with transparent viewing panels
- Automatic stop of the effluent discharge in case of an energy failure
Options
- Retention tank with level sensor connected to an alarm to increase containment securities
- Lift system
- Extra storage capacity (260 gallons) – W: 52” – L: 76” – H: 95” including vent filter
- Steam generator
- Cooling system by cold air or cold water
- Complete CIP (Cleaning in Place) for automatic cleaning of the entire system (including collecting tank)
- Access control and remote machine control
Pictures of the MICROSTEAM in action
Contact our sales department
To receive more information about our products in the USA and Canada, please contact us.